Commit graph

1206 commits

Author SHA1 Message Date
b40266b276
Add roles to handle PVE nag and repos 2021-01-09 23:21:35 +00:00
6dd86ea870
Limit ZFS ARC size on PVE 2021-01-09 22:32:55 +00:00
d87ec89887
Persist arc size
Modprobe only loads the module, it doesn't ensure the ARC value persists correctly.
2021-01-09 22:25:29 +00:00
0c6e9969bc
Give myself passwordless sudo access to zfs stuff
This is needed for syncoid pulls
2021-01-09 21:36:09 +00:00
c3053e9378
Fix location for sanoid install
This makes it sync up with where the systemd services expect them to be
2021-01-09 21:28:16 +00:00
7d235e67e0
Add ZFS configuration for PVE 2021-01-09 21:27:52 +00:00
decf5176f7
Use systemd rather than cron for sanoid
It's more reliable and easier to get logs
2021-01-09 20:57:47 +00:00
57d9c9d288
Allow configuring of pools to scrub 2021-01-09 20:52:51 +00:00
721bdf60b3
Fix quotes 2021-01-09 18:32:16 +00:00
1b72afdd29
Remove scrutiny role
SMART checks are handeld by PVE / something else in future
2021-01-09 18:30:28 +00:00
0506a78d02
Listen on public port
Makes connection so much easier
2021-01-09 18:25:08 +00:00
8fe8788458
Move ARC size to defaults so it can be easily changed 2021-01-09 18:24:52 +00:00
5b495688cd
Remove intersect wireguard keys 2021-01-09 18:23:10 +00:00
c38ecfebd7
Update gateway to point to ingress instance 2021-01-09 18:17:54 +00:00
fef7f2c2b4
Move docker containers to new PVE container 2021-01-09 18:02:17 +00:00
a35f2f91ff
Default to using python3 over "legacy python" 2021-01-09 17:55:29 +00:00
0355b6b214
Remove jellyfin docker config
It'll be replaced by something else later, don't worry.
2021-01-09 17:17:12 +00:00
2300426f0f
Move default variables into role defaults rather than group vars 2020-12-28 16:23:12 +00:00
422062ae63
Fix lint warning around missing mode
This only applies to directories https://stackoverflow.com/a/29793833
2020-12-28 16:16:35 +00:00
3338a1f898
Add jellyfin host
Role TBC
2020-12-28 16:08:15 +00:00
6267363ab0
Provision docker VM 2020-12-28 15:57:44 +00:00
bdfd38c9fe
Allow traefik to run on non-wireguard host 2020-12-28 15:55:45 +00:00
4f1e54baab
Actually enable timer 2020-12-28 15:14:50 +00:00
58879d2e1d
Ensure fail2ban and logrotate are available on all machines 2020-12-27 22:39:33 +00:00
b11dbfc829
Move traefik file provider to use directory rather than single file
This makes future composition possible
2020-12-22 15:53:03 +00:00
0353887590
Add override to ensure ZFS starts before docker
Stolen with love from 7dda0bc7cb
2020-12-21 21:37:46 +00:00
30cb9e52e7
Install and provision wireguard client on ingress server 2020-12-21 18:24:35 +00:00
3197953796
Provision PVE and ingress VM 2020-12-21 17:11:38 +00:00
44fb8f5380
Set some image resizing preferences
This stops the thumbnailing being quite as intensive
2020-12-11 17:39:58 +00:00
2bfad84071
Pin wallabag to newer version
2.4.0 came out *finally*
2020-12-11 17:39:35 +00:00
5a808e90e0
Update synapse 2020-12-11 17:36:06 +00:00
af1b7f754c
Update nextcloud to 20.0.3 2020-12-11 17:35:50 +00:00
8e6a3324a1
Install duplicati on grimes
Makes backing up website things a bit easier
2020-12-07 18:09:29 +00:00
6d75272d34
Move plausible to new server 2020-12-05 12:33:50 +00:00
e1dd6c4c05
Init new web server on Linode
I'll terraform it later, honest!
2020-12-04 23:02:19 +00:00
08bb8f22ca
Add feediron plugin for tt-rss 2020-11-25 13:16:13 +00:00
b5d676b6fe
Install fever plugin for tt-rss
Had to chown the directory afterwards, as git wouldn't play nice with `become_user`
2020-11-25 13:00:06 +00:00
48762bcfcd
Remove redundant quoting 2020-11-25 11:41:26 +00:00
a35ee7c824
Change base URL to default so the tracker script still uses disguised domain 2020-11-25 11:40:54 +00:00
2b291548f9
Just do plain path replacement 2020-11-25 11:38:47 +00:00
a81e2793f8
Add a secondary domain for plausible less likely to match blockers
Might change things, might not. But it's a fun experiment to try anyway.

Using a custom middleware to override the path due to https://github.com/plausible/analytics/pull/340
2020-11-25 11:11:29 +00:00
e8d3a72ea8
Update nextcloud to 20.0.2 2020-11-22 15:40:23 +00:00
1d8f54c778
Update synapse 2020-11-22 15:32:17 +00:00
3ddfd77bdf
Stop running synapse as root 2020-11-22 15:08:08 +00:00
310feaf332
Use correct args to build synapse DB 2020-11-22 15:07:34 +00:00
367de37fab
Actually disable unnecessary logging rather than change level
Also disable even more of them
2020-11-12 23:01:32 +00:00
2a4b3ec3e6
Increase timeout for SSH sessions
Stll check relatively often the client is still there, but check many times so the connection stays open a decent amount of time. Especially useful for long-running commands.
2020-11-08 22:04:30 +00:00
f5c7c094d3
Fix gotify container name
Gotify != duplicati
2020-11-08 11:07:57 +00:00
5c1f17e2aa
Update synapse 2020-10-28 18:22:30 +00:00
0fc57049e4
Update nextcloud to 20.0.1 2020-10-28 15:22:49 +00:00
f450d4a8f2
Pin jellyfin version 2020-10-27 17:38:10 +00:00
f414781182
Use new whoami container 2020-10-27 16:13:14 +00:00
c63506d2bc
Pin traefik to patch version 2020-10-27 16:13:14 +00:00
6ae8d0febe
Pin plausible versions 2020-10-27 16:13:14 +00:00
f665b87965
Allow NTP role to manage config
Hopefully this closes the port
2020-10-24 17:36:39 +01:00
ff72f5a25e
Move nextcloud data dir to ZFS 2020-10-24 14:26:30 +01:00
5eb3870fbe
Set mode on fail2ban filter and jail 2020-10-24 12:10:54 +01:00
8932ac828f
Add geoip database for plausible 2020-10-24 12:10:37 +01:00
47ad40bb52
Remove watchtower, and do updates manually from now on
Keeps @IronicBadger happy!
2020-10-22 18:07:48 +01:00
efd22010b7
Use new LSIO mod which does more 2020-10-19 17:29:28 +01:00
a46525aa80
Move configuration for custom port to Traefik config rather than custom container expose
Still a work-around for https://github.com/plausible/analytics/pull/237
2020-10-18 22:31:23 +01:00
0ca3f36f7a
Move some more nextcloud components to ZFS 2020-10-18 18:02:48 +01:00
58605c1c24
Don't snapshot tank root
This makes syncoid unhappy, and is generally unnecessary
2020-10-18 17:45:49 +01:00
bedbb0f5f4
Fix service to restart 2020-10-16 19:16:42 +01:00
1930cc83e8
Use generic package module 2020-10-16 19:16:42 +01:00
b2e91d7d6d
Update haproxy fail2ban jail to use systemd for logs 2020-10-16 19:16:42 +01:00
4890c3d3e5
Revert "Remove fail2ban"
This reverts commit 1f0e33acc8.
2020-10-16 19:16:42 +01:00
30baed441e
Mount external files into nextcloud
Means some bits can live outside the nextcloud dir
2020-10-10 18:01:27 +01:00
b8ea056455
Remove netdata
Don't use it anyway
2020-10-09 23:39:55 +01:00
6852b84406
Change watchtower to run daily
A holdover until less of the containers are using `:latest`
2020-10-09 23:20:07 +01:00
5496744428
Remove web-rng 2020-10-09 23:11:53 +01:00
f7afaacbdc
Move website to be hosted on GitLab pages 2020-10-09 21:35:57 +01:00
7f09db5d20
Add heimdall 2020-10-07 14:09:23 +01:00
e9f61070f8
Update nextcloud to version 20
Using the new LSIO tags for version specific pins! 🎉
2020-10-07 09:18:32 +01:00
0a9deb3d9e
Update plausible environment so it's compatible with v1
Read the changelog, folks!
2020-10-06 21:48:34 +01:00
93ccb686e7
Drive watchtower config from environment 2020-10-06 09:10:26 +01:00
413ff4dad9
Add script to update containers
This is an attended update, which is better. Eventually replace watchtower
2020-10-06 08:44:01 +01:00
2c4e1e0414
Pin Plausible to major version 2020-10-05 18:43:12 +01:00
29c9e14f62
Remove haproxy chroot
This is technically _slightly_ less secure, but means it logs to journald properly, so can be picked up by fail2ban in future
2020-10-05 11:10:29 +01:00
4c40faf21d
Move clickhouse off ZFS
For some reason, they really don't play well together!
2020-10-03 17:18:11 +01:00
68bda30cb2
Add nginx container for getting access to files via rclone 2020-10-03 11:41:38 +01:00
64788eb602
Move transcodes to tempfs
Means I can remove the scratch disk
2020-10-02 18:12:15 +01:00
1f398b25c3
Store fewer snapshots for downloads directory 2020-10-02 18:11:53 +01:00
191374b812
Move deluge onto walker
Stop torrent traffic being limitted by home broadband
2020-10-02 18:11:34 +01:00
6cfaa3a03a
Update traefik 2020-10-02 09:20:33 +01:00
aee9507ec0
Update synapse 2020-10-02 09:13:41 +01:00
addd4f351c
Update nextcloud base 2020-10-02 09:13:34 +01:00
285f7b8a31
Update Gotify 2020-10-02 09:13:13 +01:00
a799ad9657
Scale gitlab up a tiny bit 2020-10-01 19:46:04 +01:00
4742552839
Add notes site 2020-09-30 18:49:36 +01:00
4e7c5ffd67
Add docker mod to scale worker processes to a sane value 2020-09-28 20:14:41 +01:00
07b0650618
Remove statping
It's buggy as all hell, super slow, and doesn't really get used for monitoring
2020-09-27 14:17:46 +01:00
5079599b9d
Require TLS 1.2 2020-09-27 12:36:49 +01:00
d93920c2b6
Move home-assistant stuff to ZFS 2020-09-27 11:31:05 +01:00
a303bed27f
Define app data dir in variable 2020-09-26 21:15:44 +01:00
361a78e8e0
Update yamllint 2020-09-26 17:54:14 +01:00
24d11deeae
Update ansible-lint
Required a lot of renaming :(
2020-09-26 17:53:47 +01:00
cc43910be6
Fix scrutiny so it picks up which task to run correctly 2020-09-26 17:10:07 +01:00
3c21c5670c
Replace postgres with mariadb
Its' recommended, and might hopefully fix my annoying auth issues!
2020-09-26 14:49:38 +01:00
40488f62b7
Also set user id for collector container
Else it chowns the DB, and doesn't run correctly
2020-09-24 22:18:34 +01:00
fd83820faa
Install scrutiny 2020-09-21 21:16:00 +01:00
a67361b9b5
Explicitly define bed lights 2020-09-19 16:16:24 +01:00
2bbc7c715f
Add GZIP compression to projects which don't natively support it 2020-09-18 12:42:36 +01:00
092f12459e
Fix XML formatting
This caused clickhouse to crash hard!
2020-09-18 12:21:15 +01:00
782b008cd3
Fix name of config so they're not constantly changed with each run of ansible
derp!
2020-09-18 12:11:44 +01:00
62e629187b
Clean up indent 2020-09-18 12:10:53 +01:00
4ad2bdc77a
Change clickhouse connection to unified variable 2020-09-17 15:18:01 +01:00
a8438c4c2a
Add grafana image renderer 2020-09-13 10:47:59 +01:00
809a977c63
Also update nextcloud config file 2020-09-12 23:15:08 +01:00
9cea8743e9
Update gotify 2020-09-12 22:54:49 +01:00
4c92fba2b9
Change gitlab trusted proxies to be docker IP space
Else it becomes `127.0.0.1`, which is obviously not right
2020-09-12 20:03:22 +01:00
6ad9fa070f
Update nextcloud 2020-09-11 21:30:20 +01:00
9ca2546766
Decommission grimes
Most of the function has moved to `walker`
2020-09-10 20:39:54 +01:00
1ecfc5b7fa
Update traefik 2020-09-10 20:16:23 +01:00
59a447023b
Update nextcloud base 2020-09-09 20:43:52 +01:00
c220f19545
Move scratch disk under /mnt
Mounting disks is hard!
2020-09-08 21:17:51 +01:00
2db72623ad
Remove DB backups for containers on ZFS
Snapshots are a better backup
2020-09-08 20:41:47 +01:00
b47de7e70b
Disable healthchecks for GitLab pages
Because of everything we have disabled, Docker considers the container unhealthy
2020-09-05 23:08:58 +01:00
8c4397d39a
Set rails trusted proxies 2020-09-05 22:29:16 +01:00
2af3241bd2
GZIP compress gitlab pages 2020-09-05 20:52:18 +01:00
19b2330832
Disable logrotate for pages
Logs are in a tempfs anyway, and it's just another process to be running
2020-09-05 20:36:45 +01:00
ea54d1be69
Expose pages sites 2020-09-05 20:33:57 +01:00
0a1b541974
Remove compression middleware for gitlab
This is already handled by the application
2020-09-05 18:27:56 +01:00
e9aeed26ee
Use cloudflare DNS challenge for Traefik 2020-09-05 18:27:04 +01:00
0289342e2c
Remove goaccess container 2020-09-05 17:29:40 +01:00
4c1ccfc4e4
Only clear containers weekly
This will be more helpful now, as repeat CI jobs won't need to re-download containers as often
2020-09-05 17:01:54 +01:00
af9c66785e
Decrease watchtower polling rate to 10 minutes
Doesn't need to be that intensive
2020-09-05 17:01:30 +01:00
77113246b0
Remove remaining gitea configuration
Goodbye old friend
2020-09-05 16:56:27 +01:00
c1dc26ce35
Install gitlab pages daemon
I'll deal with traefik domains later
2020-09-05 16:50:56 +01:00
e579edc758
Use lsyncd to push files to gitlab pages server
Server itself in future commit
2020-09-05 16:24:47 +01:00
1487915bbc
Also disable thread log 2020-09-02 20:12:31 +01:00
c47ff494e0
Revert "Disable docker healthchecks"
Turns out it really just takes that long to start up!

This reverts commit 61ed3db887.
2020-09-01 21:50:03 +01:00
61ed3db887
Disable docker healthchecks
Makes traefik take *ages* to detect the container is actually running. Let it 502 if it has to
2020-09-01 20:12:52 +01:00
3bc1d75d9e
Ensure the correct IP is detected 2020-09-01 20:12:16 +01:00
acef6246d0
Replace gitea with gitlab
Leave gitea in place for a bit in case I need to change back suddenly
2020-09-01 19:47:39 +01:00
84d529be2f
Update synapse 2020-08-31 18:47:37 +01:00
3b7493ae8f
Set default theme to dark and assign default proxy 2020-08-30 21:11:29 +01:00
1ed078ef23
Fix SSH port for gitlab 2020-08-30 21:08:04 +01:00
4610d5ced2
Update nextcloud to 19.0.2 2020-08-30 20:28:49 +01:00
3d76c48bbf
Use postgres on homeassistant 2020-08-30 16:58:27 +01:00
ec751ffa1a
Add influxdb to monitor traefik 2020-08-30 15:58:03 +01:00
17f0e22962
Migrate grafana to postgres 2020-08-30 14:53:08 +01:00
8efb3e0d69
Expose gitlab SSH 2020-08-30 11:22:15 +01:00
796c694170
Run duplicati as root
This ensures it has all the right permissions to access all the right files. Host is mounted read-only, so there's no real security risk.
2020-08-30 11:15:08 +01:00
5940b6970a
Move gitlab to ZFS pool 2020-08-30 10:19:57 +01:00
0ce15cb4d8
Add gitlab 2020-08-29 23:56:14 +01:00
da90b12643
Modify clickhouse settings so it's not a resource whore
This means it can be moved back to ZFS!
2020-08-28 14:20:13 +01:00
c6791e4098
Remove stray vault file from removing todoist-github 2020-08-28 14:17:45 +01:00
8a7cc5e57e
Move clickhouse back to old disk
It does a stupid number of writes, and the snapshots are massive! Until i've worked out why it writes so much, move it to a less critical disk
2020-08-27 14:16:12 +01:00
9a8995f1f8
Use single cron job for pruning and taking snapshots
Less to manage, and less lock contention
2020-08-26 13:02:50 +01:00
77262cd206
Reduce number of sanoid snapshots
It should be pretty quick for me to realise something went wrong. Can recycle through space much quicker this way!
2020-08-26 09:08:26 +01:00
1f70a46c35
Add custom clickhouse config
This changes the default log level to warning, to ensure the log file isn't being hammered
2020-08-26 08:54:37 +01:00
3edc34759d
Mount clickhouse logs on tmpfs
WHO LOGS TRACE BY DEFAULT?!
2020-08-25 22:05:10 +01:00
742412259c
Mount transcodes on scratch disk
Don't want them getting caught by sanoid!
2020-08-25 14:30:26 +01:00
4feff3d247
Move jellyfin to ZFS 2020-08-25 14:17:57 +01:00
6808e86a6d
Update nextcloud base 2020-08-24 14:30:11 +01:00
922b688615
Bump ZFS usage to 50% RAM
It's a lot, but should be dealable on most machines
2020-08-23 14:15:09 +01:00
f531d4f915
Move plausible onto ZFS 2020-08-22 12:19:47 +01:00
9ffdd4d711
Move grafana to ZFS
Don't need to create the directory anymore really
2020-08-22 12:07:44 +01:00
f517831435
Install synapse config to right place 2020-08-22 12:03:04 +01:00
67dfe6a8a0
Remove todoist-github
It's got some pretty big bugs, and isn't running anyway
2020-08-22 12:01:24 +01:00
07d5c4fa72
Move quassel to ZFS 2020-08-22 11:59:10 +01:00
3dc8ee16b5
Move wallabag to ZFS 2020-08-22 11:51:51 +01:00
ff7ec46e77
Move synapse to ZFS 2020-08-22 11:42:03 +01:00
037d719906
Migrate deluge data to ZFS pool 2020-08-22 11:20:38 +01:00
8d2c6dfb68
Move gitea to ZFS 2020-08-21 16:02:56 +01:00
bc5d6d512b
Move calibre to ZFS pool 2020-08-21 15:34:04 +01:00
2866cd0602
Move TT-RSS into ZFS pool 2020-08-21 15:33:46 +01:00
35266e975d
Drive sanoid changes from YAML 2020-08-20 21:47:12 +01:00
1bcb8f22b1
Fully resolve path to sanoid
Apparently cron didn't like just `sanoid`
2020-08-20 21:24:33 +01:00
a2e021ac43
Install ZFS on home server 🎉 2020-08-19 21:34:23 +01:00
a5aa21429c
Conditionally run reflector role rather than manually defining which machines run arch 2020-08-19 18:58:58 +01:00
63ec7c671a
Manually install sanoid
Makes the foundation for a future external role
2020-08-19 18:40:17 +01:00
fcd4dbf657
Fix casing
Turns out it's a lower case "l"
2020-08-19 17:59:56 +01:00
2ef836b2e9
Remove synapse helper scripts
They're not maintained, and actually highly advised against
2020-08-18 20:39:23 +01:00
efc7a5d7fb
Allow arc to be 20% RAM usage 2020-08-18 13:47:48 +01:00
cbbd7bf83d
Update synapse 2020-08-18 13:13:25 +01:00
6716b418d7
Ensure cron tasks are run as the right user
Looks like by default they're installed as the current user, not root. Bad ansible documentation!
2020-08-17 22:29:02 +01:00
af22e89a73
Update nextcloud base 2020-08-17 13:57:53 +01:00
bf4e90d053
Update synapse 2020-08-17 13:57:44 +01:00
150a34be2f
Provide cron flag to sanoid 2020-08-17 13:49:07 +01:00
0902dd001e
Expose grafana 2020-08-07 12:03:45 +01:00
9d014cfa1c
Install grafana and link it to HA 2020-08-07 11:52:15 +01:00
301ac37868
Remove legacy integrations 2020-08-06 17:05:19 +01:00
55f79b4a51
Remove socks proxy 2020-08-05 20:56:12 +01:00
c888fc5e72
Pull new images before taking application down 2020-08-05 17:43:04 +01:00
1195a5001e
Add reflector to keep mirror lists updated 2020-08-05 12:15:28 +01:00
384a07b513
Run plausible migrations on startup 2020-08-04 22:07:45 +01:00
19c134564a
Add duplicati to walker
Gotta backup them backups
2020-08-04 21:09:45 +01:00
7d3f6a8121
Remove duplicati from grimes 2020-08-04 20:58:10 +01:00
e184c7fba1
Move website over to walker 2020-08-04 20:54:53 +01:00
6ceea80ee7
Fix website restart 2020-08-04 20:54:34 +01:00
4b7830567b
Add postgres backups for plausible 2020-08-04 19:49:21 +01:00
7c0d78ee9d
Remove folding-at-home
New server location isn't especially ventilated, so heat is an issue.

I'm sorry.
2020-08-04 19:41:01 +01:00
c435ad1ba8
Ensure plausible is restarted on error 2020-08-04 19:38:01 +01:00
969b0bd8d9
Update traefik
Fixes GHSA-6qq8-5wq3-86rp
2020-07-30 21:46:44 +01:00
ed00a0d40e
Update gitea 2020-07-29 18:26:13 +01:00
a6047da465
Use default port 2020-07-28 20:31:32 +01:00
91effbcac5
Add ZFS scrub cron job 2020-07-26 22:17:28 +01:00
6e58b07519
Remove unnecessary quotes 2020-07-26 18:22:43 +01:00
ebbd2a4015
Install zfs and sanoid 2020-07-26 18:03:09 +01:00
5cb1a470ab
Bump plausible pool size 2020-07-26 15:40:03 +01:00
f77cd1216f
Move upload server to walker 2020-07-24 17:14:39 +01:00
3c7c0ec3fa
GZIP plausible traffic
Plausible doesn't gzip for itself. Funnily enough the tracker is actually too small to be compressed by Traefik!
2020-07-22 12:18:49 +01:00
9ee4e1c14b
Add plausible analytics 2020-07-21 20:55:44 +01:00
74d40ac915
Update traefik 2020-07-18 13:29:20 +01:00
005cc528b6
Update nextcloud to 19.0.1 2020-07-17 14:48:50 +01:00
7a38207ef0
Update traefik 2020-07-15 14:53:36 +01:00
b7aebfaabd
Move statping to new machine
Also update it to the latest version. It's probably still buggy AF, but it'll do for what I need it to rigth now.
2020-07-14 19:35:55 +01:00
52e8f34198
Pin jellyfin to latest
It can update itself just fine
2020-07-13 18:09:33 +01:00
9d962c324b
Update synapse 2020-07-13 18:04:20 +01:00
bb5a5b61bd
Update traefik 2020-07-13 18:04:11 +01:00
dd8523ebdd
Update gitea 2020-07-13 18:02:51 +01:00
eed13e3727
Setup offsite storage service
My own lil' S3
2020-07-12 21:01:06 +01:00
3c49c80ff1
Ensure traefik only listens on wireguard network 2020-07-12 19:29:18 +01:00
0314908eac
Install docker on new server 2020-07-12 19:21:27 +01:00
9c0682ef9b
Restrict SSH connections to wireguard cidr
Except on home server, still handy to connect on same network.
2020-07-12 17:53:02 +01:00
a6a3982cc8
Provision keys for walker 2020-07-12 17:19:51 +01:00
693c3fc0ab
Remove legacy vars file 2020-07-12 17:12:47 +01:00
63eecf7a56
Provision new dedicated server 2020-07-12 17:06:02 +01:00
e5e308fafa
Remove firewall role
firewalld does not play nice with docker!
2020-07-12 17:04:13 +01:00
f2d7d63e2d
Update nextcloud base 2020-07-10 16:15:13 +01:00
dc2b51db6b
Update synapse 2020-07-10 16:02:06 +01:00
ba486a26e4
Update duplicati 2020-07-09 19:27:53 +01:00
13a70b27a4
Add RGB LED controller 2020-07-06 20:48:57 +01:00
82bffc3538
Setup firewalld 2020-07-03 21:53:31 +01:00
fba284f9a9
Change primary gitea domain to the one I actually use 2020-07-02 19:42:51 +01:00
1c99477ce9
Move nextcloud config into root 2020-07-02 18:44:27 +01:00
c80d4b7e04
Move tt-rss config out of config directory 2020-07-02 18:24:26 +01:00
689c0cecd9
Set permissions on nextcloud data dir 2020-07-02 17:52:53 +01:00
452118e2a9
Update synapse 2020-07-02 17:41:22 +01:00
86a398d6b4
Replace docker-compose restart hack with shell handler hack
The docker-compose integration would start 2 of the same container, which does bad things to things like databases!
2020-06-28 20:13:12 +01:00
71086ca291
Do HA person management through web UI 2020-06-28 19:35:39 +01:00
e2ca9ad4a9
Don't use host hack to connect to influx
Just bind to internal port like a sane person
2020-06-28 19:16:22 +01:00
9f09554053
Set some sysctl settings so zeroconf works for HA
https://stackoverflow.com/a/46890741
2020-06-28 17:35:49 +01:00
bf2a5e9320
Add Tado and Arlo integrations 2020-06-27 21:00:18 +01:00
e4aba817cc
Fix influxdb comms
Stupid host network mode and DNS
2020-06-27 21:00:07 +01:00
cfd46ea752
I'm probably where my phone is 2020-06-27 19:53:21 +01:00
fe5a5984c3
Remove container names from containers
They're not needed for anything, and caused annoying weird issues when cycling containers
2020-06-27 17:45:28 +01:00
681d591176
Add ESPHome 2020-06-27 16:45:00 +01:00
c89715c52b
Add influxdb for homeassistant storage 2020-06-27 16:34:41 +01:00
93b4bef05d
Add home-assistant 2020-06-27 16:16:52 +01:00
e5cbae81f4
Switch from Emby to Jellyfin
Merge remote-tracking branch 'origin/jellyfin'
2020-06-25 21:39:19 +01:00
e051db5e71
Remove obsolete middleware 2020-06-24 18:48:39 +01:00
7119d5877f
Only expose deluge to internal network
And VPN
2020-06-24 18:48:30 +01:00
dd12b795b5
Remove pihole
Internal VPN server is working just perfectly instead
2020-06-24 18:46:13 +01:00
7d61282d19
Set depends_on where needed 2020-06-24 18:35:20 +01:00
7a3643f3c2
Persist mirror caches outside container 2020-06-24 18:21:14 +01:00
c771e425fb
Replace ansible with system installed version
Similar to a572868b8f
2020-06-24 17:14:25 +01:00
df54decc99
Mirror dotfiles repo 2020-06-24 16:47:31 +01:00
82a3c85263
Install git-mirror container
This also moves the canonical home of this repo to my gitea instance!
2020-06-24 16:27:13 +01:00
5f9b337c7a
Update gitea 2020-06-24 14:26:12 +01:00
2ab8928985
Update nextcloud base 2020-06-24 14:26:05 +01:00
319c96512e
Change default theme to original
Black and green looks odd
2020-06-22 21:03:08 +01:00
913ee4759f
Quote value to silence errors 2020-06-18 21:18:47 +01:00
9ba9593127
Remove debug log level for deluge 2020-06-18 20:50:04 +01:00
f878866f10
Update yamllint 2020-06-18 20:49:12 +01:00
9f59b30f1e
Update synapse 2020-06-18 20:34:23 +01:00
7f62ed43d4
Update gitea to 1.12 2020-06-18 20:33:09 +01:00
c09b46aac0
Stop moving into ansible/ before running things
Makes life easier
2020-06-15 13:21:52 +01:00
4d13e3c78f
Move requirements files into ansible dir 2020-06-15 13:11:44 +01:00
624d1b5425
Set HSTS header for nextcloud 2020-06-13 21:14:23 +01:00
ca188ab1b4
Rename middleware
It's not actually applying a HSTS header
2020-06-13 21:09:48 +01:00
d7b6abaf58
Update to nextcloud 19 2020-06-13 21:06:33 +01:00
a22f555878
Unpin the versions of things I don't care about too much
If they update and break, it's not the end of the world, however unlikely it may be
2020-06-13 19:38:42 +01:00
a3d19eba94
Update synapse 2020-06-13 19:27:53 +01:00
cfee50159a
Remove netdata from grimes
`htop` works just fine for that machine
2020-06-11 19:30:48 +01:00
3969b23cd0
Keep using fancy index
Repairs breaking change from 0f036dd6d7
2020-06-11 19:24:53 +01:00
e1ae11e388
Update quassel base 2020-06-10 13:54:18 +01:00
26aba92483
DIal back emby update
Apparently that was a pre-release
2020-06-10 13:53:47 +01:00
e54ec1312c
Replace onlyoffice with collabora 2020-06-07 21:09:02 +01:00
0724ae9238
Update redis 2020-06-07 15:09:20 +01:00
61a50435c9
Update emby 2020-06-05 19:11:49 +01:00
fa41b09d83
Update deluge base 2020-06-05 17:36:09 +01:00
15720fded8
Update quassel base 2020-06-05 17:35:56 +01:00
1f9ea561df
Update calibre 2020-06-05 17:35:37 +01:00
0a13b8e34d
Update nextcloud base 2020-05-31 13:30:37 +01:00
d41d1b0d6c
Update gitea 2020-05-31 13:26:47 +01:00
605ae4f8b8
Make sure media is owned correctly 2020-05-30 15:35:55 +01:00
e5d77f23fd
Update deluge base 2020-05-29 15:37:49 +01:00
249045e4cd
Update synapse 2020-05-29 15:37:39 +01:00
cd076b871c
Update duplicati base 2020-05-29 15:36:40 +01:00
f59c625058
Move nextcloud DB to SSD
Speeeeeeeeed
2020-05-28 20:20:33 +01:00
28cdaefb05
Update nextcloud base 2020-05-27 16:17:32 +01:00
adc7611242
Only bind duplicati to wireguard interface 2020-05-25 17:38:26 +01:00
986fc50fde
Set hostname for duplicati so it's picked up correctly in the UI
This shouldn't have any negative impact. Hopefully...
2020-05-25 17:32:44 +01:00
851f750948
Move duplicati to its own role so it can be installed on grimes 2020-05-25 17:25:58 +01:00
b45d399734
Mount entire host inside duplicati 2020-05-25 17:01:29 +01:00
7dd31c0556
Allow nextcloud to be reached over internal SSL
This removes the need for a custom config, and means traefik is proxying HTTP2, which is nice
2020-05-24 19:21:17 +01:00
eac381a90a
Decrease resource limit on FaH
It's getting hot
2020-05-24 18:37:57 +01:00
d2269de4ad
Claenup docker util scripts 2020-05-23 18:25:00 +01:00
ceca641e2f
Remove deprecated options 2020-05-23 11:47:31 +01:00
c92f924faa
Harden host key 2020-05-23 11:45:53 +01:00
2fe6cf7c93
Install mobile key 2020-05-23 11:23:45 +01:00
20d5020f6b
Manually use file lookup so the terminal output looks nicer 2020-05-23 11:18:48 +01:00
09418cffb0
Provision SSH keys with ansible now 2020-05-23 11:04:50 +01:00
7e534e52e1
Merge SSH into base role 2020-05-23 10:58:09 +01:00
991535ca85
Add phone to VPN network 2020-05-23 10:49:18 +01:00
16881048e2
Update duplicati 2020-05-23 10:35:59 +01:00
892ac4e950
Update synapse 2020-05-22 22:34:37 +01:00
cd255f7ca2
Remove docker-rclone-mount
Seems there's some issues where having this attached which makes the duplicati container delete all its RO mounts.
2020-05-22 21:09:40 +01:00
7fbfbbb699
Ansiblize rclone mounts configs 2020-05-22 12:04:43 +01:00
251d52f1de
Add rclone mounts 2020-05-22 11:47:45 +01:00
9b9af7e90d
Set nextcloud trusted proxy to docker host IP 2020-05-21 18:11:51 +01:00
fc7b57eab9
Modify some things and cleanup gitea config 2020-05-21 17:58:38 +01:00
1c8d80e12d
Revert "Add a redis cache to gitea"
This reverts commit c0c396f008.

Causes weird stability issues as the process received sig 15 and
restarts, which is strange!
2020-05-21 12:03:45 +01:00
6d51b570a1
Revert "Revert "Remove ansible_host definition""
This reverts commit 2a39292b85.

Reverted the wrong commit. Derp!
2020-05-21 12:03:22 +01:00
2a39292b85
Revert "Remove ansible_host definition"
This reverts commit e93dbf2ecf.

Causes weird stability issues as the process received sig 15 and
restarts, which is strange!
2020-05-19 22:06:04 +01:00
c0c396f008
Add a redis cache to gitea 2020-05-19 21:49:09 +01:00
e93dbf2ecf
Remove ansible_host definition
No idea why it was there, too much noise!
2020-05-18 17:12:21 +01:00
85e7714f2e
Rename galaxy requirements 2020-05-18 16:46:18 +01:00
b9e6e8801e
Mount a directory for restore testing
And for actual restores, should the time come...
2020-05-18 12:08:10 +01:00
9850f73a17
Deploy web-rng
https://github.com/RealOrangeOne/web-rng
2020-05-17 18:04:44 +01:00
323a3db478
Auto detect python executable
Causes weird issues with the compose integration
2020-05-17 18:03:57 +01:00
1d56db2109
Ensure python3 is always used 2020-05-16 16:16:23 +01:00
600bc4bb58
Ensure sysctl change is persisted
See note in https://wiki.archlinux.org/index.php/Sysctl#Configuration
2020-05-16 16:15:58 +01:00
f207b2eedd
Update quassel base 2020-05-14 14:16:19 +01:00
1a51624f5f
Update nextcloud base 2020-05-14 14:16:11 +01:00
98f478a1ca
Update pihole to v5 2020-05-14 14:15:36 +01:00
825b7926af
Update duplicati base 2020-05-14 14:15:28 +01:00
851c6b167c
Remove yourls
Mariadb update broke it, but I never use it anyway.
2020-05-14 13:54:59 +01:00
6f7f7aae94
Remove TOR proxy
Wasn't actually using it, proxying through `grimes`
2020-05-12 20:43:19 +01:00
112e8ce985
Install some wireguard tools 2020-05-11 11:59:46 +01:00
93e5ce5bac
Reduce polling interval slightly so things update quicker 2020-05-10 22:20:03 +01:00
eb65e8808d
Update gitea 2020-05-10 19:38:00 +01:00
40cf931f14
Update deluge base 2020-05-10 19:37:48 +01:00
8f32d74095
Update gotify 2020-05-10 19:29:36 +01:00
2d655a3da0
Remove unnecessary strings 2020-05-10 19:23:41 +01:00
d693240eb4
Just hardcode to bash
I'm not resetting my login shell again!
2020-05-10 19:19:42 +01:00
f156bd6860
Use which to get path to bash 2020-05-09 21:06:03 +01:00
59868fc331
Install git on all hosts 2020-05-09 21:03:43 +01:00
52ae01d29f
Add user to docker group 2020-05-09 20:48:46 +01:00
59a721b243
Create user 2020-05-09 20:47:41 +01:00
5289206f14
Remove unnecessary quotes 2020-05-09 20:11:08 +01:00
1f0e33acc8
Remove fail2ban
Keeps getting hit by stats. I should fix that at some point
2020-05-09 20:09:36 +01:00
f3126e34b9
Update haproxy config for use on arch 2020-05-09 20:08:27 +01:00
059cb585db
Use OS-agnostic package install for haproxy 2020-05-09 20:08:14 +01:00
095c8c4562
Use sysctl to enable p2p comms 2020-05-09 20:07:19 +01:00
f6214f1495
Replace nginx with static server 2020-05-09 17:14:16 +01:00
bb5e489f8c
Remove the explicit enable of TLS in Traefik
Much cleaner config!
2020-05-08 22:16:24 +01:00
19fc0c0957
Add shorter URLs for upload 2020-05-08 21:45:27 +01:00
2f523075ae
Add upload server 2020-05-08 21:27:32 +01:00
2618f38c52
Update nextcloud base 2020-05-06 16:28:19 +01:00
f511f0d604
Alllow librespeed to be accessed over home network 2020-05-06 16:18:47 +01:00
56ebe2ad01
Use basic-auth to protect librespeed rather than whitelist 2020-05-06 16:11:29 +01:00
aad14a4ceb
Update calibre 2020-05-05 22:30:03 +01:00
5db68b7658
Update quassel base 2020-05-05 22:29:57 +01:00
54ec7f2332
Add a basic SOCKS proxy 2020-05-05 21:55:14 +01:00
bc545b742a
Redirect 0rng.one to website 2020-05-01 21:26:48 +01:00
ae7ee2dd81
Update deluge base 2020-04-30 21:57:10 +01:00
59e5a13cd0
Update nextcloud base 2020-04-30 21:53:34 +01:00
0256570f1c
Update traefik 2020-04-30 21:50:18 +01:00
ceeba55a83
Migrate from emby to jellyfin 2020-04-30 21:45:03 +01:00
974e0e8467
Enable services
Not just during reload
2020-04-28 20:48:15 +01:00
61136f69af
Update quassel base 2020-04-28 20:45:10 +01:00
bd8e41a1aa
Update gotify 2020-04-28 20:45:02 +01:00
68a684c7f6
Set gitea SSH domain to alias 2020-04-28 20:31:29 +01:00
957d4d7b69
Only use a single domain for YOURLS 2020-04-26 16:33:05 +01:00
bfce9e1cbf
Host statping outside home 2020-04-26 15:37:28 +01:00
7c6abc33fe
Host website outside home 2020-04-26 14:26:48 +01:00
36ed622a26
Make the docker host role block more exhaustive 2020-04-26 14:00:17 +01:00
92c85904bd
Rename role for intersect docker applications 2020-04-26 13:56:26 +01:00
05c7690b83
Make grimes a docker host 2020-04-26 13:44:06 +01:00
50cb5a56fc
OpenSSH is called something different on Arch 2020-04-26 12:16:18 +01:00
0bd4b5f5fd
Provision a new VPS 2020-04-26 12:15:52 +01:00
ea45f6833c
Always provision SSH 2020-04-26 12:06:11 +01:00
051ec43769
wg-quick can't be reloaed
This might break things!
2020-04-26 12:05:45 +01:00
4aa5a7d5a8
Use package so it's OS agnostic 2020-04-26 11:25:01 +01:00
3e523bd04b
Remove traefik subdomain 2020-04-25 12:15:28 +01:00
6695e60f8e
Update nextcloud 2020-04-24 22:12:49 +01:00
6a862f9fb3
Always restart watchtower 2020-04-24 21:38:00 +01:00
2ddde6c129
Fix task names of new roles 2020-04-23 21:54:04 +01:00
5585fb0b12
Convert watchtower into its own role 2020-04-23 21:51:01 +01:00
81ef4ad67a
Rename base role to common 2020-04-23 21:38:16 +01:00
b11ca7fe21
Convert netdata into its own role 2020-04-23 21:32:18 +01:00
975ba9a2ed
Remove netdata domain 2020-04-23 21:16:48 +01:00
89ba23719c
Move traefik into its own role 2020-04-23 20:49:43 +01:00
9962d9103f
Extract docker cleanup stuff into its own role 2020-04-23 20:17:54 +01:00
7a296c63a2
Update YOURLS 2020-04-23 17:31:43 +01:00
eba4b8226f
Update synapse 2020-04-23 17:31:21 +01:00
221bdf62ef
update quassel base 2020-04-23 17:31:11 +01:00
7113802df7
Update nextcloud base 2020-04-23 17:31:03 +01:00
303283f73e
Remove portainer 2020-04-19 21:42:57 +01:00
d87b91d5aa
Update some LSIO container bases 2020-04-18 22:53:15 +01:00
ff8beea3c4
Massively increase timeouts to prevent websocket issues 2020-04-17 23:04:20 +01:00
d2ca5a51be
Revert "Update statping and move to new container"
This reverts commit 880054eb2d.

Statping 0.90 is buggy AF, see https://github.com/statping/statping/issues/456
2020-04-17 22:10:40 +01:00
1da3ca95e7
Stop using unstable repos to install wireguard
It's in backports now, which is much easier to install from!
2020-04-17 09:08:10 +01:00
880054eb2d
Update statping and move to new container 2020-04-15 21:17:01 +01:00
853dfbf9a1
Update nextcloud base 2020-04-15 18:26:06 +01:00
be15714cca
Update quassel base 2020-04-13 19:37:16 +01:00
4f5a99263f
Remove cgit landing pages
I can use an org to make the URLs in gitea slightly nicer, which will do for now
2020-04-11 17:37:05 +01:00
17f5aa921b
Sort items in main.yml 2020-04-11 17:23:28 +01:00
df017b3ee6
Add a server-side analytics page 2020-04-10 12:33:51 +01:00
8185ad979d
Update deluge base 2020-04-10 11:35:54 +01:00
d0c36adba8
Self host my website 🎉 2020-04-10 11:31:01 +01:00
92d33a0fa7
Update emby 2020-04-09 08:45:09 +01:00
30e47836fa
Update nextcloud 2020-04-09 08:43:42 +01:00
c634b87991
Expose MC server
It's just a local temp config for now, i'll do something proper later
2020-04-07 18:43:40 +01:00
9de6c4a515
Update quassel base 2020-04-06 19:44:39 +01:00
091fd9045b
Update emby base 2020-04-04 22:35:39 +01:00
0e79f4a7ba
Fuck isolation! 2020-04-04 11:41:41 +01:00
0ef3901ee6
Update emby 2020-04-04 11:16:57 +01:00
7b0cc0893d
Add shorter domain for whoami container 2020-04-03 23:59:07 +01:00
7322adc52a
Remove py3 suffix
It's all python3
2020-04-03 11:29:42 +01:00
94a62ba724
Update synapse 2020-04-03 11:26:56 +01:00
be068a774a
Add my user to dockeruser group
Makes debugging things so much easier!
2020-04-02 09:05:32 +01:00
f7f417b780
Update gitea 2020-04-01 19:54:25 +01:00
d91746ebeb
Update nextcloud base 2020-04-01 19:46:00 +01:00
f32e0bfe59
Only add timeout for core HTTP ports 2020-03-31 19:27:47 +01:00
335992c9e9
Restore custom middleware implementation.
This redirect doesn't work correctly, let's revert to our custom one for
now. It does exactly the same thing, anyway
2020-03-31 14:53:00 +01:00
079e58e67b
Add some automated postgres backups 2020-03-30 21:40:04 +01:00
10991def1e
Run the prune without prompt, and hard remove images 2020-03-30 18:23:11 +01:00
d1e814f097
Prune the system daily rather than weekly 2020-03-30 18:19:24 +01:00
2f17d2a9ff
Update quassel base 2020-03-30 18:07:22 +01:00
0e330066ba
Update emby base 2020-03-30 18:07:13 +01:00
8fe288549f
Update traefik to 2.2.0
This removes my custom hack for redirecting users to HTTPS
2020-03-30 17:59:02 +01:00
7c5968c39a
Update emby 2020-03-28 15:39:42 +00:00
4199423815
Update deluge base 2020-03-28 11:31:14 +00:00
ca3ed14973
Add automated DB backups for nextcloud
Will roll this out to everything else someday too!
2020-03-27 17:50:47 +00:00
55eca663a9
Replace f@h container with lsio one
Also move configuration into web UI, just because it's easier
2020-03-27 17:23:07 +00:00
1afc28ec17
Standardize string quotes in yaml 2020-03-25 21:27:15 +00:00
35bd63d12b
Add pv to handy tools 2020-03-25 20:52:41 +00:00
65e15c9f6c
Run watchtower more frequently
This makes autodeployment like tasks much easier
2020-03-25 20:41:15 +00:00
fdaf037b96
Update nextcloud base 2020-03-25 16:27:20 +00:00
5eb7e2feb8
Update nextcloud to 18.0.3 2020-03-25 08:50:03 +00:00
d15c27d109
Bump quassel base 2020-03-23 20:19:10 +00:00
3cb2542982
Update synapse 2020-03-23 18:29:24 +00:00
95c3e46783
Setup shorter yourls domain 2020-03-20 22:29:43 +00:00
ef083badc1
Use shiney new domain for git hosting 2020-03-20 22:21:02 +00:00
5938f7fca6
Remove statping from internal DNS
This *hammers* pihole and massively inflates the metrics. Remove for now until there's a sane way to fix it
2020-03-19 19:16:04 +00:00
02293459e1
Localise queries
Doesn't do anything yet, but it might some day...
2020-03-19 19:14:45 +00:00
45ae2be523
Update nextcloud container base 2020-03-18 21:49:20 +00:00
5f79109195
Convert nextcloud db to postgres 2020-03-18 21:35:17 +00:00
7eda50239c
Remove reference to become_user: root
This was the default anyway
2020-03-17 21:11:02 +00:00
236757b4c0
Update emby container base 2020-03-17 20:42:09 +00:00
24686f8cb3
Merge custom dnsmasq config into pihole 2020-03-17 20:29:40 +00:00
8093bcbcbb
Just use the autogenerated one
It's _fine_.
2020-03-17 18:38:47 +00:00
717391334e
Use a short pihole password so it actually works 2020-03-17 18:10:06 +00:00
69a6da95b9
Add pihole to internal DNS record 2020-03-16 20:13:07 +00:00
359efe72b4
Install pihole
Eventially it'll replace dnsmasq, but not today
2020-03-16 13:44:24 +00:00
aa05b675f4
Kinda install ctop 2020-03-15 16:39:40 +00:00
cdcfcf3c66
Increase fail2ban threshold 2020-03-15 15:02:57 +00:00
a0dd40847e
Install wallabag
It's sqlite, for now
2020-03-15 14:34:28 +00:00
4210013039
Update deluge base container 2020-03-15 12:07:48 +00:00
8a5267bc61
Update librespeed 2020-03-15 12:05:17 +00:00
1f78e2eb2c
Update nextcloud to 18.0.2 2020-03-15 12:00:38 +00:00
b3e307f147
Move config into nextcloud directory 2020-03-15 11:51:23 +00:00
871555532d
Stop passing through the entire config directory
This makes updates so much easier!
2020-03-15 11:45:55 +00:00
708250005a
Install fail2ban 2020-03-13 23:08:26 +00:00
92af315e69
Change haproxy timeouts 2020-03-13 22:26:30 +00:00
1c1bdc3cbd
Update gitea 2020-03-11 21:24:33 +00:00
16acfb1f11
Update nextcloud container base 2020-03-11 21:24:27 +00:00
47c0b65dfe
Add some helper synapse cleanup scripts 2020-03-10 20:08:46 +00:00
16e01c4a10
Update synapse to 1.11.1 2020-03-10 19:03:01 +00:00
31497155ee
Replace lsio mariadb container with official 2020-03-10 13:27:43 +00:00
88af6f6da9
update quassel base 2020-03-10 08:56:40 +00:00
c7bd4fc413
Reduce retention policy 2020-03-09 13:42:00 +00:00
f9bae27e4e
Update gitea 2020-03-08 20:07:28 +00:00
ac70fceca5
Convert all compose files to v2 2020-03-08 18:12:20 +00:00
6f1258232c
Install statping 2020-03-08 16:41:13 +00:00
dd956450dc
Start folding 2020-03-08 15:13:44 +00:00
b8e866058f
Update nextcloud container base 2020-03-06 08:54:16 +00:00
242f6f07c9
Update traefik 2020-03-03 13:15:16 +00:00
bb9408a39e
Update quassel base 2020-03-03 13:10:58 +00:00
000ceea198
Update emby container base 2020-03-03 13:07:59 +00:00
99a2472be8
Update nextcloud container 2020-03-03 13:04:19 +00:00
fa929cbca5
Install ntp from galaxy 2020-03-02 19:45:16 +00:00
85f6f59970
Use ansible galaxy to install docker 2020-03-02 19:37:11 +00:00
20c4e049c6
Provision wireguard keys for too-work 2020-02-28 16:16:31 +00:00
d1100485c0
Update emby container to fix issues with multiple processes running
Or at least, I think this fixed it
2020-02-24 21:52:36 +00:00
238bc2acff
Update calibre 2020-02-24 08:51:03 +00:00
23d41a90b6
Fix *all* the linting errors in synapse config 2020-02-22 21:46:37 +00:00
61b6dc5c7b
Trim newlines in ttrss config 2020-02-22 21:02:54 +00:00
5d804828bb
Cleanup nextcloud config 2020-02-22 20:51:49 +00:00
63aa3a7216
Drive part of ansible context from terraform 2020-02-21 21:51:16 +00:00
45946741d5
Update synapse 2020-02-21 09:25:00 +00:00
2ab3803030
Update gotify 2020-02-21 09:24:55 +00:00
b82381a5fe
Update nextcloud container 2020-02-21 09:20:36 +00:00
f978acdae4
Update deluge 2020-02-21 09:17:58 +00:00
b8ca1a8996
Update quassel 2020-02-18 08:59:09 +00:00
d290f2f68f
Use cgit as a simple frontend to gitea 2020-02-17 21:46:50 +00:00
be3a571d2c
Update mariadb container 2020-02-17 13:03:39 +00:00
88884a0f3a
Update config.php to match what's actually installed 2020-02-17 13:03:18 +00:00
11260d5a08
Upgrade nextcloud container 2020-02-17 12:52:10 +00:00
a95b36169c
Update gitea 2020-02-17 09:39:48 +00:00
c558346f70
Install and configure duplicati 2020-02-14 21:26:15 +00:00
3b30054958
Add helper script to access Nextcloud's occ cli 2020-02-14 09:27:44 +00:00
8325af9f6c
Update gitea to 1.11 2020-02-14 08:58:14 +00:00
0391f032c8
Upgrade quassel and deluge 2020-02-10 09:28:34 +00:00
42c565c368
Setup retention policy
Hopefully this puts a bit more of a handle on DB size
2020-02-10 09:15:19 +00:00
81d2be3b74
Install todoist-github 2020-02-09 15:48:22 +00:00
4c92e2df3b
Add nextcloud config
Damn this needs cleaning up at some point!
2020-02-09 15:21:48 +00:00
c264a707c3
Add synapse config 2020-02-09 14:15:46 +00:00
0da675db1c
Add quassel config 2020-02-09 13:19:45 +00:00
77fe92a7e7
Add torrent (deluge) config 2020-02-09 13:06:10 +00:00
81cccea858
Enable gzip and check for updates 2020-02-09 12:51:39 +00:00
1dbc7ea2c7
Drop some unnecessary comments
Reducing the amount of PHP in my infrastructure repo is a good thing!
2020-02-09 12:48:27 +00:00
ac12da5c02
Add tt-rss 2020-02-09 12:43:38 +00:00
92ff9cf787
Provision VPN config for laptop 2020-02-07 21:09:54 +00:00
253453ba16
Reload wireguard rather than restarting
Hopefully this stops it dropping connections
2020-02-07 21:09:41 +00:00
5027e77534
Have yourls redirect root to admin page
I keep forgetting this is a thing and thinking it's broken
2020-02-07 13:57:03 +00:00
94da91db8e
Install yourls 2020-02-07 13:49:13 +00:00
32d4e108f9
Update librespeed 2020-02-07 09:04:13 +00:00
b66ef84289
Explicitly pin portainer to latest tag 2020-02-07 09:04:06 +00:00
9c6f9dc288
Update gitea 2020-02-07 09:01:06 +00:00
eed3031170
Install gitea 2020-02-07 08:57:48 +00:00
c184936114
Upgrade traefik
This is the first upgrade of a container through this repo, and it worked perfectly! 🎉
2020-02-07 08:40:04 +00:00
e6a659e4cb
Add calibre compose file 2020-02-05 20:37:01 +00:00
e0b8b7961a
Add space in comment 2020-02-02 22:30:48 +00:00
7f1be920d6
Add some docker util scripts 2020-02-02 22:20:17 +00:00
035ff0ac24
Add traefik config 2020-02-02 21:10:29 +00:00
a42c1a4182
Read PUID from variable 2020-02-02 20:28:08 +00:00
8a14b09ce8
Install gotify 2020-02-02 20:22:23 +00:00
9a770df6dc
Fix NTP permissions 2020-02-02 20:19:51 +00:00
1414357ad7
Install librespeed 2020-01-30 13:43:28 +00:00
cdc7209013
Add emby docker compose files 2020-01-30 13:35:10 +00:00
78d860bfcb
Setup a cron job to cleanup docker containers 2020-01-30 13:27:10 +00:00
11e49eb76e
Add whoami 2020-01-30 13:20:31 +00:00
31462f85ee
Validate compose files 2020-01-28 22:17:12 +00:00
a9a27d617b
Add internal dns container 2020-01-28 22:15:14 +00:00
d1e5f63efd
Add portainer compose file 2020-01-28 22:02:02 +00:00
c3959d43c6
Install watchtower
Also move file masks to config so they're consistent
2020-01-28 21:55:53 +00:00
3142ba75c6
Add netdata docker-compose file 2020-01-28 21:50:29 +00:00
01ce422e11
FIx name of task to add docker apt key 2020-01-28 21:49:29 +00:00
9d8e7cbc9c
Setup and install docker 2020-01-28 21:32:29 +00:00
d61cb64c7e
Harden SSH config 2020-01-28 21:04:26 +00:00
0dbeb64710
Add recommend key exchange 2020-01-28 20:56:07 +00:00
14b7b6d2ef
Internalise SSH config and make it generic to all hosts 2020-01-28 20:39:42 +00:00
eb796ce1f9
Set timezone as root 2020-01-28 20:03:20 +00:00
879a5571ca
Add home server 2020-01-28 20:02:35 +00:00
5cb378fae1
Connect to machines over VPN 2020-01-28 19:33:16 +00:00
b8a5a4cb72
Remove password authentication 2020-01-26 18:49:02 +00:00
0d95311176
Add VPN config for bartowski
Hey look, no leaked keys this time!
2020-01-26 18:35:00 +00:00
b4bb3f01f2
Convert haproxy config to use spaces 2020-01-26 18:17:55 +00:00
ac5a9aa0f0
Remove SSL block from haproxy config 2020-01-26 18:15:19 +00:00
03b3bd5ddb
Disable login as root 2020-01-26 18:10:07 +00:00
af936990e2
Add custom DNS server 2020-01-23 20:06:45 +00:00
ec478c3cf5
Fix client config 2020-01-19 17:59:36 +00:00
4de7939902
Re-provision big-mike VPN 2020-01-19 17:59:25 +00:00
7eaf608e3c
Revoke exposed wireguard keys
Derp derp derp
2020-01-19 17:41:34 +00:00
35605ce0a6
Move wireguard clients configuration to home dir
Makes it easier to provision machines
2020-01-19 17:33:14 +00:00
9ba8dab836
Provision wireguard config for work laptop 2020-01-19 17:22:53 +00:00
251fe11113
Output wireguard client config files 2020-01-19 16:43:51 +00:00
f6ffb1ceef
Template haproxy better 2020-01-17 22:56:45 +00:00
78fa36f20a
Move variables to 1 place
Much easier to manage
2020-01-17 22:31:50 +00:00
0d142e455f
Add ansibe confgi file 2020-01-17 20:38:45 +00:00
aaee2b443d
Add base packages 2019-12-09 20:55:47 +00:00
d0d2d6668e
Install NTP 2019-12-08 21:17:30 +00:00
23a472f764
Add wireguard server config 2019-12-08 21:05:20 +00:00
730246e67f
Install wireguard server 2019-12-08 20:16:42 +00:00
7713820e51 Fix typo 2019-12-08 19:27:54 +00:00
58a3683355 Define haproxy config 2019-12-08 16:47:28 +00:00
f8ecd8bf78 Ensure SSH is installed 2019-12-08 16:03:13 +00:00
db68581f19 Simplify hosts file 2019-12-08 15:57:48 +00:00
b0277c2f46 COnfigure SSH bastion 2019-12-08 15:55:19 +00:00
ce54cf1f4c Init ansible workflow 2019-12-08 11:58:43 +00:00